Evolve Remap And Evolve-R - BMW Z4M
Evolve Remap And Evolve-R - BMW Z4M

Evolve Remap And Evolve-R - BMW Z4M

SKU: EVOLVERZ4M
Prix de vente£655.00
Description

The Evolve-R is our latest revolutionary hardware release, enabling customers to load our industry leading ECU software upgrade directly into their vehicles themselves, at home.

The Evolve-R is an OBD-II compatible device which connects to your vehicles OBD-II port and your laptop. via a supplied USB cable.

We call it revolutionary because no other tool can cover as many vehicle protocols. Our unit will cover most European models that we carry tunes for (new vehicles will be added weekly)

In the pack you receive there will be the evolve-R OBD-II adaptor with USB cable

2009 saw further development and something completely new for the S54 engine to allow real power gains.

Many claims to 15-30hp+ have been made over the years, but nothing ever materialised.

The S54 engine responds well to the right type of ECU software. Conventional methods of advancing the ignition timing under full load has little effect. This is what the industry has seen over the years with no gain in power neither on the road or the dyno. Typically we saw improvements in throttle response and nothing more.

By re-calibrating ignition timing, VANOS timing, torque limiters and fueling more power/torque is available at both partial and full load. Low end torque and top end power are the main areas which improve the most and it is these very areas which need improvement.

In terms of 'peak' power, between 14-18 hp is available above 5000 rpm.

The Evolve software makes a significant change to how the Z4M drives and accelerates. A standard car will accelerate well up to 5500 rpm, but beyond that the power begins to fall. Once upgraded the power continues to climb leading to a far more linear power delivery.

We can also build into the software the following:

  • Rear Lambda Sensor delete for M3's without CAT's or high flow CAT's which trigger the engine management
  • Air Mass Sensor delete (Alpha-N)

OVERVIEW

  • Additional 14-18 hp on a stock vehicle
  • Fully developed on dyno and road
  • Top speed limiter removal
  • Sharper throttle response and drivability
  • Flash from home convenience
  • Return to stock anytime
  • Reads fault codes

ECU Tune Options:

  • RPM Increase
  • Top Speed Limiter Removal

To get this software we now offer the Evolve-R remote tuning tool. The Evolve-R is the latest hardware release from Evolve, enabling customers to load our industry leading ECU software upgrade directly into their vehicles themselves, at home.

Already have other modifications? We have various stages available.

The Evolve-R software can be found HERE

Shipping
  • Our order cut-off time is 2pm.
  • Free delivery to UK mainland (apart from Scottish Highlands, Remote Island).
  • Shipping to Northern Ireland, Scottish Highland and other remote locations bears/requires a surcharge of £20.00.
  • Worldwide shipping available! Please contact us for a quote.
  • In-stock items will be dispatched within 1–2 working days. If the item is out of stock or made to order, we will contact you within 24 hours to give you the option to cancel or proceed with your order with a lead time of 2–6 weeks depending on the item.
  • Contact us for stock check. Our team is happy to assist.
Fitting & Warranty
  • Our product/s come with fitting kits where applicable, double sided tape include for spoiler.
  • Professional installation is always recommended on all Carbon Factory's product/s.
  • Fitting partners across the country, contact us and we can recommend a specialist near you.
  • All Carbon Factory products come with a 6 month warranty, unless otherwise stated. View the full warranty information on our website.
  • Fitting guidelines can be found on here.

  • It is the fitter's responsibility to ensure the item is fitted securely. Carbon Factory will not be held responsible if the item becomes loose from the car.

Matte Carbon Fibre / Forged Carbon Fibre

Carbon Fibre Finish Options

Our carbon fibre parts are available in three finishes:

  • Gloss Carbon Fibre – The standard high-gloss carbon fibre finish.
  • Matte Carbon Fibre – A smooth, “flat” finish that provides a more subtle and refined look. Example

           Price: 10% more than the standard RRP
           Lead time: Approximately 4–5 weeks

  • Forged Carbon Fibre – Features a unique, non-traditional weave pattern, offering enhanced strength but requiring more material to produce. Example

           Price: 20% more than the standard RRP
           Lead time: Approximately 4–5 weeks

Gloss Black Parts Options

Selected gloss black parts are also available in a matte black finish.

Lead time: Approximately 2–3 weeks.

Disclaimer

Please note that this product is an aftermarket part and is not manufactured or endorsed by the original equipment manufacturer (OEM).

This product is designed for track and show use only and is not intended for public road use. Usage of this product is at your own risk and responsibility. Carbon Factory Limited is not liable for any fees, penalties, or costs incurred due to the failure to verify compliance with applicable laws and regulations prior to purchase and installation.

You may also like

FAQ's

Everything you need to know about our products, fitment, and delivery.

Our customer support is available Monday to Saturday: 8am-4:30pm.Average answer time: 24h