Great quality item, really easy to fit and looks great fitted.
Absolutely love it. Fits perfectly.
Brilliant product and delivery was way earlier than expected
Looks good fits well
Carbon Factory Splitter Bolt-On Kit | High-Strength Tape & Self-Tapping Bolts
- This is an aftermarket part compatible with:
- Shipping
- Fitting & Warranty
- Matte Carbon Fibre / Forged Carbon Fibre
- Disclaimer
This is an aftermarket part compatible with:
Secure your splitter properly. A front splitter takes the brunt of the wind and the road; don't rely on screws alone. The Carbon Factory Splitter Fitting Kit combines high-strength automotive grade double-sided tape with heavy-duty mechanical fixings to ensure your splitter stays exactly where it belongs—even under intense downforce and high-speed driving.
What’s in the Kit?
-
2x Rolls of Ultra-Bond Clear Tape: Automotive-grade acrylic tape to create a seamless, vibration-dampening seal between the splitter and your bumper.
-
14x Heavy-Duty Self-Tapping Bolts: Black-finish, wide-flange bolts designed to bite securely into plastic bumpers without backing out.
-
14x Speed Clips (U-Nuts): For extra reinforcement in high-stress areas, providing a metal-on-metal grip for the bolts.
Why Choose This Kit?
Most splitters fail because they are either "just taped" or "just bolted." Our kit uses a dual-lock system: the tape prevents sagging and unsightly gaps, while the hardware provides the mechanical strength to handle high speeds and the occasional scrape against speed bumps or curbs.
Easy 5-Step Installation Guide
-
Prep: Thoroughly clean the underside of your bumper and the splitter with alcohol or a panel wipe to remove all road grime and wax.
-
Tape & Prime: Apply the clear tape to the splitter.
-
Position: Align the splitter carefully and press firmly to allow the tape to grab and hold the part in place.
-
Mechanical Fix: Using a pilot hole if necessary, drive the self-tapping bolts through the splitter into the bumper. Use the included Speed Clips for maximum security on thinner plastic sections.
-
Final Check: Ensure all fixings are tight. Your splitter is now high-speed rated and road-ready!
Note: While this kit is designed for straightforward installation, professional fitting is always recommended to ensure maximum safety and perfect alignment. Carbon Factory is not responsible for damage caused by incorrect installation.
Shipping
- Our order cut-off time is 2pm.
- Free delivery to UK mainland (apart from Scottish Highlands, Remote Island).
- Shipping to Northern Ireland, Scottish Highland and other remote locations bears/requires a surcharge of £20.00.
- Worldwide shipping available! Please contact us for a quote.
- In-stock items will be dispatched within 1-2 working days. If the item is out of stock or made to order, we will contact you within 24 hours and allow you to cancel or process your order with a lead time of around 4-6 weeks.
- Contact us for stock check. Our team is happy to assist.
Fitting & Warranty
- Our product/s come with fitting kits where applicable, double sided tape include for spoiler.
- Professional installation is always recommended on all Carbon Factory's product/s.
- Fitting partners across the country, contact us and we can recommend a specialist near you.
- All Carbon Factory products come with a 6 month warranty, unless otherwise stated. View the full warranty information on our website.
- Fitting guidelines can be found on here.
-
It is the fitter's responsibility to ensure the item is fitted securely. Carbon Factory will not be held responsible if the item becomes loose from the car.
Matte Carbon Fibre / Forged Carbon Fibre
Carbon Fibre Parts
In addition to the classic glossy finish, we now offer matte finish and forged carbon fibre options.
- Matte Carbon Fibre – A smooth, “flat” finish that provides a more subtle and refined look. Example
- Forged Carbon Fibre – Features a unique, non-traditional weave pattern, offering enhanced strength but requiring more material to produce. Example
Gloss Black Parts
A matte finish option is also available.
Lead Time: Approximately 2-3 weeks.
Disclaimer
Please note that this product is an aftermarket part and is not manufactured or endorsed by the original equipment manufacturer (OEM).
This product is designed for track and show use only and is not intended for public road use. Usage of this product is at your own risk and responsibility. Carbon Factory Limited is not liable for any fees, penalties, or costs incurred due to the failure to verify compliance with applicable laws and regulations prior to purchase and installation.
- This is an aftermarket part compatible with:
- Shipping
- Fitting & Warranty
- Matte Carbon Fibre / Forged Carbon Fibre
- Disclaimer
This is an aftermarket part compatible with:
Secure your splitter properly. A front splitter takes the brunt of the wind and the road; don't rely on screws alone. The Carbon Factory Splitter Fitting Kit combines high-strength automotive grade double-sided tape with heavy-duty mechanical fixings to ensure your splitter stays exactly where it belongs—even under intense downforce and high-speed driving.
What’s in the Kit?
-
2x Rolls of Ultra-Bond Clear Tape: Automotive-grade acrylic tape to create a seamless, vibration-dampening seal between the splitter and your bumper.
-
14x Heavy-Duty Self-Tapping Bolts: Black-finish, wide-flange bolts designed to bite securely into plastic bumpers without backing out.
-
14x Speed Clips (U-Nuts): For extra reinforcement in high-stress areas, providing a metal-on-metal grip for the bolts.
Why Choose This Kit?
Most splitters fail because they are either "just taped" or "just bolted." Our kit uses a dual-lock system: the tape prevents sagging and unsightly gaps, while the hardware provides the mechanical strength to handle high speeds and the occasional scrape against speed bumps or curbs.
Easy 5-Step Installation Guide
-
Prep: Thoroughly clean the underside of your bumper and the splitter with alcohol or a panel wipe to remove all road grime and wax.
-
Tape & Prime: Apply the clear tape to the splitter.
-
Position: Align the splitter carefully and press firmly to allow the tape to grab and hold the part in place.
-
Mechanical Fix: Using a pilot hole if necessary, drive the self-tapping bolts through the splitter into the bumper. Use the included Speed Clips for maximum security on thinner plastic sections.
-
Final Check: Ensure all fixings are tight. Your splitter is now high-speed rated and road-ready!
Note: While this kit is designed for straightforward installation, professional fitting is always recommended to ensure maximum safety and perfect alignment. Carbon Factory is not responsible for damage caused by incorrect installation.
Shipping
- Our order cut-off time is 2pm.
- Free delivery to UK mainland (apart from Scottish Highlands, Remote Island).
- Shipping to Northern Ireland, Scottish Highland and other remote locations bears/requires a surcharge of £20.00.
- Worldwide shipping available! Please contact us for a quote.
- In-stock items will be dispatched within 1-2 working days. If the item is out of stock or made to order, we will contact you within 24 hours and allow you to cancel or process your order with a lead time of around 4-6 weeks.
- Contact us for stock check. Our team is happy to assist.
Fitting & Warranty
- Our product/s come with fitting kits where applicable, double sided tape include for spoiler.
- Professional installation is always recommended on all Carbon Factory's product/s.
- Fitting partners across the country, contact us and we can recommend a specialist near you.
- All Carbon Factory products come with a 6 month warranty, unless otherwise stated. View the full warranty information on our website.
- Fitting guidelines can be found on here.
-
It is the fitter's responsibility to ensure the item is fitted securely. Carbon Factory will not be held responsible if the item becomes loose from the car.
Matte Carbon Fibre / Forged Carbon Fibre
Carbon Fibre Parts
In addition to the classic glossy finish, we now offer matte finish and forged carbon fibre options.
- Matte Carbon Fibre – A smooth, “flat” finish that provides a more subtle and refined look. Example
- Forged Carbon Fibre – Features a unique, non-traditional weave pattern, offering enhanced strength but requiring more material to produce. Example
Gloss Black Parts
A matte finish option is also available.
Lead Time: Approximately 2-3 weeks.
Disclaimer
Please note that this product is an aftermarket part and is not manufactured or endorsed by the original equipment manufacturer (OEM).
This product is designed for track and show use only and is not intended for public road use. Usage of this product is at your own risk and responsibility. Carbon Factory Limited is not liable for any fees, penalties, or costs incurred due to the failure to verify compliance with applicable laws and regulations prior to purchase and installation.
You may also like
FAQ's
Everything you need to know about our products, fitment, and delivery.
Do you ship overseas?
Yes, we ship all over the world. Shipping costs will apply, and will be added at checkout. We run discounts and promotions all year, so stay tuned for exclusive deals.
How long will it take to get my orders?
UK orders are typically dispatched within 3–5 business days. International orders generally arrive within 7–14 business days depending on your location and customs clearance.
Will this fit my car?
All of our products are listed with specific fitment information. Please check the product description carefully before purchasing. If you're unsure, contact us before ordering and we'll confirm compatibility..
Our customer support is available Monday to Saturday: 8am-4:30pm.Average answer time: 24h